TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes an easy way to add privacy and a decorative touch to glass shower doors: place a curtain rod above the enclosure and hang a curtain in front of the glass. The setup avoids replacing the doors, but measurements, curtain clearance and safe rod installation matter.
A DIY idea featured by Hunker offers a way to add adjustable privacy to glass shower doors without replacing them: hang a curtain rod above the enclosure and place a shower curtain in front of the glass. The approach, shown by Instagram user @daysofapril, can also add color or pattern to a bathroom, though the report does not provide cost estimates or test results.
The setup calls for a curtain rod, shower curtain and rings. The curtain can be drawn closed when someone wants privacy and moved aside when the shower is not in use. The arrangement leaves the existing glass doors in place, making it a smaller project than replacing an enclosure or undertaking a major renovation.
Hunker advises measuring the shower width and deciding where the rod should sit before buying supplies. In the example, the rod is placed about one foot above the top of the glass, but the report says ceiling height and curtain length may call for a different position. Measure from the planned rod location to the curtain’s intended endpoint, and check that the fabric will not drag on the floor or create a tripping hazard.
A tension rod is presented as the simplest and least expensive option, while a mounted rod may suit a more permanent arrangement. Once the rod is secure, add the rings and curtain and check that the fabric slides freely. Hunker specifically warns against attaching hardware directly to the glass shower door or enclosure, citing the potential for glass to break.
Privacy Without Replacing the Enclosure
For households that share a bathroom, a curtain in front of glass doors can provide a quick visual screen when someone else enters the room. The key practical difference is that the curtain can be opened again, preserving the open look of the glass when privacy is not needed.
The idea also offers a decorative change without committing to new doors or a larger renovation. Hunker suggests that a soft white or beige curtain can suit a calmer look, while a bolder print or distinctive rings can add visual interest. These are design options, not measured claims about how much privacy or value the project adds.
The low-complexity concept still depends on a suitable rod, correct measurements and a curtain that clears the floor. The report does not establish whether every shower layout can accommodate the arrangement, so readers should check their own space before buying materials.
Products Worth Considering
Ring Alarm 8-Piece Kit (2nd Gen) Home Security System
Ring Alarm 14-Piece Wireless Security System
Bose SoundLink Flex Bluetooth Speaker (2nd Gen), Black
As an affiliate, we earn on qualifying purchases.
How the Curtain Setup Works
The report addresses two drawbacks Hunker associates with glass shower doors: they can leave the shower area visible when other people are in the bathroom, and they require frequent cleaning. It presents the curtain as an add-on rather than a replacement, allowing the doors to remain in place while the curtain provides an additional layer of visual separation.
The featured Instagram example is described as placing the rod above the glass and hanging the curtain in front of it. Hunker says the project’s shopping list is short, but it does not name particular products, provide a step-by-step installation video in the supplied material or report a verified price. The guidance is therefore a basic DIY suggestion rather than a product review or a tested installation standard.
“She hangs a curtain rod above the shower and adds a shower curtain in front of the glass so you can pull it closed when you want some privacy, then open it again when you’ve finished.”
— Hunker, describing the Instagram DIY by @daysofapril
Fit and Installation Depend on the Bathroom
The supplied report does not state the project’s cost, installation time or tested durability, and it does not establish that the method fits every shower. Rod placement depends on the enclosure, ceiling height and curtain length; the report’s roughly one-foot example is not presented as a universal measurement.
It is also unclear whether a tension rod will remain secure in every bathroom or whether a particular mounted option is appropriate for a given wall. Hunker warns against fastening hardware to the glass but does not give detailed instructions for drilling into walls, identify wall materials or discuss local building requirements. Readers should follow the rod manufacturer’s directions and avoid modifying the glass enclosure.
Measure Before Buying the Rod
The practical next step is to measure the shower width and the distance from the intended rod position to the curtain’s endpoint. Choose a rod and curtain that fit those measurements, leaving enough clearance so the fabric does not drag or obstruct entry. After installation, check that the curtain opens and closes smoothly and that the rod is stable.
Hunker does not announce a follow-up test or additional development. The outcome for any individual bathroom will depend on its dimensions and the selected hardware; the report recommends keeping attachments off the glass itself.
Key Questions
What is the DIY solution for glass shower doors?
Hang a curtain rod above the shower and place a shower curtain in front of the glass. The curtain can be pulled closed for visual privacy and opened when it is not needed.
What supplies are needed?
The report lists a curtain rod, shower curtain and rings. It does not specify brands or give a project price.
How high should the rod sit?
Hunker’s example places it roughly one foot above the glass, but says the right position depends on ceiling height and curtain length. Measure the space and make sure the curtain will not reach the floor in a way that creates a hazard.
Can the rod be attached to the glass?
No. Hunker warns readers to avoid attaching hardware directly to the glass door or enclosure because the glass could break. Follow the hardware maker’s installation directions for the chosen rod.
Source: hunker.com
