TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes Malco’s TS1 TurboShear, a $69.98 drill attachment designed for metal, as an option for cutting vinyl siding. It may offer faster straight and curved cuts than a utility knife, but the report says it can struggle with ribbed panels and is not suited to thicker vinyl flooring.
Malco’s TurboShear TS1, a drill attachment sold for about $69.98, can also cut vinyl siding, according to a Hunker report describing the tool as an alternative to a utility knife for some do-it-yourself projects. The attachment is designed for metal, and its usefulness on vinyl depends on the material and cut: it may handle ordinary siding but can have difficulty with corrugated panels and is not rated for thicker vinyl plank flooring.
The TS1 attaches to a drill or impact driver and is designed to cut sheet metal, metal building panels, siding and ductwork. Hunker reports that it can make cuts in vinyl siding without chipping, including in cold weather. At 1.75 pounds, the attachment is also relatively portable. The report cites a Home Depot score of 4.1 stars from 185 ratings, with 81% of purchasers recommending it; only one reviewer specifically mentioned using it on vinyl, and that reviewer gave it five stars.
A utility knife remains useful for straight cuts made against a guide, but Hunker says it is less effective for curves and can veer off course along the molded grain in siding. Power shears can cut more quickly and make curved cuts. The TS1’s jaws can start a cut in an opening as small as half an inch, and the report says the attachment can make tight curves and square cuts.
The TS1 is intended for vinyl siding within its jaw capacity, not every vinyl product. The report puts siding thickness at about 0.035 to 0.055 inches or more; even thin luxury vinyl plank flooring is around 0.079 inches, beyond the tool’s stated capacity. Hunker also cites reviewer reports of trouble with ribbed or corrugated panels. Adjusting the jaws wider may help with corrugations, but the report advises returning them to a narrower setting for long cuts in flat siding.
A Faster Option for Siding Cuts
For homeowners making several siding cuts, the attachment may reduce the time and effort required compared with working by hand, particularly for curves or cuts that do not follow a straight edge. It also avoids the need to guide a sharp utility knife through material, though power shears still require careful handling and the report does not claim they eliminate injury risk.
The price is part of the appeal: Hunker describes the TS1 at $69.98, less than many standalone power shears. But the purchase may make less sense for a small job or infrequent use, and the TS1’s limits could matter on textured or corrugated siding. Its cutting jaws also wear over time, especially when used on metal; replacement blades are available, according to the report.
Products Worth Considering
Samsung 65-Inch The Frame Pro Neo QLED 4K TV (2026) Bundle with Modern Brown Bezel, HDMI Cables, and Home Theater Guide
Levoit Core 400S-P Smart Air Purifier for Large Rooms (Up to 1,718 sq ft)
Dyson V15 Detect Cordless Vacuum
As an affiliate, we earn on qualifying purchases.
How the TS1 Compares
The TS1 is one of several drill-mounted shear attachments that can be used for siding. Hunker says DeWalt offers a somewhat cheaper alternative with slightly lower retailer ratings, while Skyshalo and Vevor attachments cost less but have few ratings. The latter two models have 360-degree swiveling heads and include a drill clamp, according to the report. Malco’s clamp for the TS1 costs about $30, and the tool requires both hands to operate without it.
Malco also sells the TSV1 Vinyl Siding Shears, a model made specifically for vinyl siding. Hunker says its longer cut and wider jaw are designed to handle thicker material and corrugations, and that it comes with a telescoping drill clamp. The report gives its price as $210 to $267. It also notes that dedicated power shears are available at a wide range of prices, from a $42.72 corded Wen model to an $819 corded Makita model. Prices and retailer availability can change.
“The Malco TurboShear (model TS1) will work with any drill or impact driver to cut sheet metal, metal building panels, vinyl siding, ductwork, and even thicker metals.”
— Hunker report
Limits Across Siding Types
The report does not provide independent test results comparing the TS1 with utility knives or other shears, and the retailer rating is not specific to vinyl use. How well it performs may depend on siding thickness, panel shape, jaw adjustment and the cut required. Hunker cites just one Home Depot reviewer who specifically discussed vinyl.
It is also unclear how long the blades last under typical DIY use or what replacement blades cost. Prices, ratings and stock can change, and the report does not establish whether a particular model will suit every siding manufacturer’s material or profile. Buyers should check the tool’s specifications and the siding maker’s guidance before cutting.
Check Fit Before Buying
Anyone considering the TS1 should confirm the siding thickness and profile, decide whether the job involves flat or corrugated panels, and compare the attachment’s price with a dedicated shear or a manual tool. For users who expect to cut corrugated or thicker vinyl, Hunker points to Malco’s purpose-built TSV1 as an alternative, at a substantially higher reported price.
The source report does not announce a product launch or a change in availability; it evaluates existing tools. The next practical step for buyers is to check current specifications, prices and retailer feedback before starting a project. Follow the drill and attachment instructions, secure the workpiece, and use appropriate eye and hand protection while cutting.
Key Questions
Can the Malco TS1 cut vinyl siding?
Hunker reports that the TS1 can cut vinyl siding, although it was designed for metal. Performance may vary by siding thickness and shape, and the report cites limited customer feedback specifically about vinyl.
Can it cut vinyl plank flooring?
The report says the TS1 is not suited to thicker vinyl plank flooring. It cites thin luxury vinyl plank at about 0.079 inches, beyond the attachment’s stated capacity.
What problems can occur with corrugated siding?
Hunker cites reviewer reports that the TS1 can struggle with ribbed or corrugated panels. A wider jaw adjustment may help, but the report recommends returning to a narrower setting for long cuts in flat siding.
How much does the TS1 cost?
The Hunker report lists the TS1 at about $69.98. Retail prices and availability may change, so check current listings before buying.
Does the TS1 cut in both directions?
No. The report says it makes straight cuts and cuts to the left. It says users can flip the workpiece when needed to make a cut from the opposite side.
Source: hunker.com
