If your Bissell ProHeat 2X Revolution Pet Turbo (model 35799) isn’t spraying water or cleaning solution, it can hinder your carpet cleaning efforts. Fortunately, many issues are fixable with simple troubleshooting steps. This guide will help you identify causes and implement safe, effective solutions to get your machine spraying again.
Understanding basic maintenance and common problems can save you time and money, ensuring your cleaner performs at its best when you need it most.
Key Takeaways
| Clogged Nozzle | Blocked spray nozzles prevent solution flow. |
| Solution Tank Issue | Incorrectly seated or empty tank disrupts spraying. |
| Pump Malfunction | Pump failure stops water/solution delivery. |
| Filter or Debris Blockage | Clogged filters or debris hinder spray system. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Motor Technology: 40% more suction, quieter operation
- Max Clean Mode: Removes dirt, stains, allergens
- Express Clean Mode: Dries carpets in 30 minutes
As an affiliate, we earn on qualifying purchases.
Check the Solution Tank
- Ensure the solution tank is filled with the correct cleaning solution and seated properly in the machine.
- Remove the tank, check for any cracks or leaks, and refill if necessary.
- Securely reattach the tank, ensuring it clicks into place.
Inspect the Spray Nozzle
- Locate the spray nozzle at the front of the cleaner.
- Remove any visible debris or hair that may be clogging it.
- Use a small pin or needle to clear any blockages in the nozzle holes carefully.
Examine the Pump and Hoses
Listen for the pump noise during operation. If you hear nothing, the pump may be faulty or disconnected. Check hoses for kinks or blockages and straighten or clear them as needed.
Clean or Replace Filters
- Remove any filters as per the user manual.
- Wash them thoroughly with water and dry completely before reinstalling.
- If filters are damaged, replace them with compatible ones like the JORAIR multi-surface filters.
Test the Machine
After completing the above steps, reassemble the cleaner and run a test on a small carpet area. Observe if the spray function has been restored.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 19.8 lbs
- ✔ Cord Length: 25 ft
- ✔ Capacity: 1.25 liters
JORAIR Brush Replacement Compatible
- ✔ Weight: Approx. 1 lb
- ✔ Material: Plastic and synthetic fibers
- ✔ Package Count: 7-piece set
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers strong suction and multiple cleaning modes, making it ideal for deep cleaning carpets affected by pets. Regular maintenance can prevent spray issues and keep your machine performing optimally.
Pros:
- High suction power
- Multiple cleaning modes
- Heatwave technology
- Pet stain removal
Cons:
- Can clog if not maintained
- Requires regular filter cleaning
- Nozzle can block
Best for: Pet owners and heavily soiled carpets
Not ideal for: Light cleaning or infrequent use
Bottom line: Regular cleaning and troubleshooting can keep your Bissell cleaner spraying effectively.
JORAIR Brush Replacement Compatible
If your Bissell needs a new brush roll or filters, the JORAIR compatible set provides an affordable, reliable upgrade, ensuring optimal spray and cleaning performance.
Pros:
- Compatible with multiple Bissell models
- Includes brushes and filters
- Easy to install
- Affordable
Cons:
- Not OEM, potential fit issues if not checked
- Limited to CrossWave models listed
- Requires manual cleaning
Best for: Replacing worn brushes and filters
Not ideal for: For non-CrossWave models outside compatibility
Bottom line: Use with compatible CrossWave models to maintain cleaning efficiency.
Frequently Asked Questions
What should I do if my Bissell cleaner is not spraying solution?
First, check the solution tank for proper seating and fill level. Then, inspect the spray nozzle and clean any blockages. Verify the pump is functioning and that filters are clean.
Can I use any cleaning solution in my Bissell cleaner?
It’s best to use Bissell Multi-Surface Solution or other recommended formulas compatible with your model. Avoid harsh chemicals that could damage internal parts.
How often should I clean the filters and nozzles?
Clean filters and nozzles after every few uses or whenever you notice a decrease in spray performance to maintain optimal function.
Is it safe to disassemble my Bissell cleaner for troubleshooting?
Yes, but only follow manufacturer guidelines and unplug the device before disassembly. If unsure, seek professional repair services to avoid damage.
Keep Your Carpet Cleaner in Top Shape
Regular maintenance, such as cleaning filters, inspecting nozzles, and ensuring the solution tank is correctly seated, can prevent many spray issues. If problems persist, replacement parts like the brush roll or filters can restore your machine’s performance. With proper care, your Bissell ProHeat 2X Revolution Pet Turbo will continue to deliver deep, effective cleaning for years to come.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
